[Strings.0804]
; Localizable Strings
V_MCHP="Microchip Technology Inc."
LAN7500.DeviceDesc          = "LAN7500 USB 2.0 到以太网 10/100/1000 适配器"
LAN7505.DeviceDesc          = "LAN7505 USB 2.0 到以太网 10/100/1000 适配器"

LAN7500.PackageDesc.ntx64   = "LAN7500 USB 2.0 到以太网 10/100/1000 适配器 x64 驱动程序"
LAN7500.Service.DispName    = "LAN7500 USB 2.0 到以太网 10/100/1000 适配器服务"
MCHP_DISK_NAME="LAN7500 USB 到以太网驱动程序文件"

;Parameters and values
FlowControl     = "流控制"
Disabled            = "已禁用"
Tx_Enabled          = "已启用 Tx"
Rx_Enabled          = "已启用 Rx"
Rx_And_Tx_Enabled   = "已启用 Rx 和 Tx"

SpeedDuplex         = "速度和双工"
SpeedDuplex_AutoNeg = "自动协商"
SpeedDuplex_10HD    = "10 Mbps 半双工"
SpeedDuplex_10FD    = "10 Mbps 全双工"
SpeedDuplex_100HD   = "100 Mbps 半双工"
SpeedDuplex_100FD   = "100 Mbps 全双工"
SpeedDuplex_1000FD  = "1.0 Gbps 全双工"

NetAddr         = "网络地址"

PriorityAndVlan = "数据包优先级和 VLAN"
PVDisabled      = "已禁用数据包优先级和 VLAN"
PVEnabled       = "已启用数据包优先级和 VLAN"
VlanID          = "VLAN ID"

USBBwMode       = "USB 带宽使用模式"
USBBwMaxTput    = "最大吞吐量"
USBBwFriendly   = "友好共享"
USBBwAutomatic  = "自动"

PMARPOffloadDesc = "PM ARP 卸载"
PMNSOffloadDesc  = "PM NS 卸载"
DeviceSleepOnDisconnectDesc = "断开连接时设备睡眠"

LsoV1IPv4Desc   = "大量发送卸载 V1 (IPv4)"
LsoV2IPv4Desc   = "大量发送卸载 V2 (IPv4)"
LsoV2IPv6Desc   = "大量发送卸载 V2 (IPv6)"

IpCsoIPv4        = "IPv4 校验和卸载"
TcpCsoIPv4       = "TCP 校验和卸载(IPv4)"
TcpCsoIPv6       = "TCP 校验和卸载(IPv6)"
UdpCsoIPv4       = "UDP 校验和卸载(IPv4)"
UdpCsoIPv6       = "UDP 校验和卸载(IPv6)"

Enabled         = "已启用"

TxEnabled       = "已启用 Tx"
RxEnabled       = "已启用 Rx"
TxRxEnabled     = "已启用 Rx 和 Tx"

JumboMtu        = "巨型帧大小"

NetDetach       = "NetDetach"
NDModeOFF       = "已禁用"
NDModeON        = "已启用"
NDModeAuto      = "自动"

EDPD            = "能量检测断电"
EDPDOFF         = "已禁用"
EDPDON          = "已启用"

AutoMdix        = "自动 Mdix"
AMDIXOn         = "打开"
AMDIXOff-Swap   = "关闭/交叉"
AMDIXOff-Normal = "关闭/直接"

SSuspend        = "选择性暂停"
SSEnable        = "已启用"
SSDisable       = "已禁用"

SSIdleTimeout   = "选择性暂停空闲超时"

WakePattern     = "在模式匹配时唤醒"
WakeMagicPkt    = "在收到幻数据包时唤醒"
WakeDisable     = "已禁用"
WakeEnable      = "已启用"