[Strings.0804]
; Localizable strings
Mellanox                 = "Mellanox Technologies Ltd."
MSFT                     = "Microsoft"
ReceiveFrameDescriptors  = "接收帧描述符"
TransmitControlBlocks    = "传输控制块"
Disabled                 = "已禁用"
Enabled                  = "已启用"
MaxFrameSize             = "大型数据包"
ThreadPoll               = "接收时轮询的数量"
SendPollingModCount      = "轮询裁决 Tx 数据包计数"
SendPollingModTime       = "轮询裁决 Tx 数据包时间"
DIRID_SYSTEM         	 = 11
DIRID_DRIVERS            = 12
HeaderDataSplit          = "标头数据拆分"
SendCompletionMethod     = "发送完成方法"
RecvCompletionMethod	 = "接收完成方法"
RecvRingSize             = "接收缓冲区"
SendRingSize             = "发送缓冲区"
Polling                  = "轮询"
Interrupts               = "中断"
Adaptive                 = "自适应"
No_rebalnce              = "已禁用"
NDIS_RSS                 = "已启用"
RssMode                  = "接收方缩放"
NumaNodeId               = "首选 NUMA 节点"
NumaNodeId_default       = "默认设置"
node0                    = "节点 0"
node1                    = "节点 1"
node2                    = "节点 2"
node3                    = "节点 3"
node4                    = "节点 4"
node5                    = "节点 5"
node6                    = "节点 6"
node7                    = "节点 7"
RssBaseProcNumber        = "RSS 基础处理器数量"
MaxRssProcessors         = "RSS 处理器的最大数量"
RssMaxProcNumber         = "RSS 最大处理器数"
NumRSSQueues             = "RSS 队列的最大数量"
RssProfile                = "RSS 负载平衡配置文件"
Closest_Processor         = "ClosestProcessor"
Closest_Processor_Static  = "ClosestProcessorStatic"
Numa_Scaling              = "NumaScaling"
Numa_Scaling_Static       = "NumaScalingStatic"
Conservative_Scaling      = "ConservativeScaling"
FailOver                 = "故障转移"
RxIntModeration	         = "Rx 中断裁决类型"
Static                   = "静态"
InterruptModeration      = "中断裁决"
TxEnabled                = "已启用 Tx"
RxEnabled                = "已启用 Rx"
TxRxEnabled              = "已启用 Rx 和 Tx"
IPChecksumOffloadIPv4    = "IPv4 校验和卸载"
TCPUDPChecksumOffloadIPv4= "TCP/UDP 校验和卸载(IPv4)"
TCPUDPChecksumOffloadIPv6= "TCP/UDP 校验和卸载(IPv6)"
LsoV2IPv4		 = "大量发送卸载 V2 (IPv4)"
LsoV2IPv6		 = "大量发送卸载 V2 (IPv6)"
TxRingNum		 = "Tx 环号"


VMQ                      = "虚拟机队列"
VMQVlanFiltering         = "VMQ VLAN 筛选"

ipoib6x_CX.DeviceDesc        = "Mellanox ConnectX IPoIB 适配器"
ipoib6x_CX_V.DeviceDesc	     = "Mellanox ConnectX 虚拟 IPoIB 适配器"
ipoib6x_CX2.DeviceDesc	     = "Mellanox ConnectX-2 IPoIB 适配器"
ipoib6x_CX2_V.DeviceDesc     = "Mellanox ConnectX-2 虚拟 IPoIB 适配器"
ipoib6x_CX3.DeviceDesc       = "Mellanox ConnectX-3 IPoIB 适配器"
ipoib6x_CX3_V.DeviceDesc     = "Mellanox ConnectX-3 虚拟 IPoIB 适配器"
ipoib6x_CX3Pro.DeviceDesc    = "Mellanox ConnectX-3 Pro IPoIB Adapter"
ipoib6x_CX3Pro_V.DeviceDesc  = "Mellanox ConnectX-3 Pro 虚拟 IPoIB 适配器"

;;;;; cards of other companies
ipoib6x_CX3.18cd.DeviceDesc   = "HP 10Gb 2-port 544FLR-QSFP IPoIB Adapter"
ipoib6x_CX3_V.18cd.DeviceDesc = "HP 10Gb 双端口 544FLR-QSFP 虚拟 IPoIB 适配器"

ipoib6x_CX3Pro.22f1.DeviceDesc    = "HP 10Gb 2-port 544+M IPoIB Adapter"
ipoib6x_CX3Pro_V.22f1.DeviceDesc  = "HP 10Gb 双端口 544+M 虚拟 IPoIB 适配器"
ipoib6x_CX3Pro.22f2.DeviceDesc    = "HP 10Gb/40Gb 2-port 544+M IPoIB Adapter"
ipoib6x_CX3Pro_V.22f2.DeviceDesc  = "HP 10Gb/40Gb 双端口 544+M 虚拟 IPoIB 适配器"
ipoib6x_CX3Pro.22f3.DeviceDesc    = "HP 10Gb/40Gb 2-port 544+QSFP IPoIB Adapter"
ipoib6x_CX3Pro_V.22f3.DeviceDesc  = "HP 10Gb/40Gb 双端口 544+QSFP 虚拟 IPoIB 适配器"
ipoib6x_CX3Pro.22f4.DeviceDesc    = "HP 10Gb/40Gb 2-port 544+FLR-QSFP IPoIB Adapter"
ipoib6x_CX3Pro_V.22f4.DeviceDesc  = "HP 10Gb/40Gb 双端口 544+FLR-QSFP 虚拟 IPoIB 适配器"
ipoib6x_CX3Pro.22f5.DeviceDesc    = "HP 10Gb 2-port 544+FLR-QSFP IPoIB Adapter"
ipoib6x_CX3Pro_V.22f5.DeviceDesc  = "HP 10Gb 双端口 544+FLR-QSFP 虚拟 IPoIB 适配器"


Eoib63.DeviceDesc        = "Mellanox EoIB 适配器"
ipoib6x.Service.DispName = "基于 Mellanox ConnectX 的 IPoIB 适配器(NDIS 6.3)驱动程序"
DiskDescription          = "Mellanox 驱动程序磁盘 1"
GUID_MASK_STR            = "GUID 位掩码"
SA_QUERY_TO_STR	         = "SA 查询超时"
SA_QUERY_RETRY_STR       = "SA 查询重试次数"
ND_STR                   = "NetworkDirect 功能"
QPR                      = "查询路径记录"

RxIntModerationProfile   = "Rx 中断裁决配置文件"
TxIntModerationProfile   = "Tx 中断裁决配置文件"
LowLatency               = "低延迟"
Moderate                 = "中等"
Aggressive               = "高性能"

REG_DWORD                = 0x00010001
REG_DWORD_NO_CLOBBER     = 0x00010003
FLG_ADDREG_NOCLOBBER     = 0x00000002